Following the waters home

`I grew up in Golden, Colorado at the base of the foothills of the Rockies. No wonder my interests tend towards Colorado roads, and I have a bit of a narrow gauge interest. So I suppose it should not be a surprise that I would also put the Colorado Central on my list of possible subjects.

The Colorado Central ran from Denver, out to Golden and followed Clear Creek into the mountains. At Forks Creek, the line split, heading to Black Hawk and Central City on one route, and continuing up to Idaho Springs, Georgetown and Silver Plume. Along the way, the line climbs the Georgetown Route, winds through Clear Creek Canyon and serves the mining communities along the way. Perhaps the most famous rendition of the line is the HOn3 Union Central and Northern Railroad, housed in the Cheyenne Depot and built by Harry Brunk. Much of the construction of the model railroad is covered in a series in the Narrow Gauge and Short Line Gazette, and republished in not just one, but two books Up Clear Creek on the Narrow Gauge and More Up Clear Creek on the Narrow Gauge.



The UC&N model railroad also is captured on YouTube in a fun video.

Most of the models of this line seem to focus on the portion of the line west of Golden. Golden and Denver are often unmodeled - or represented with staging. Interestingly enough, the ends of the line interchanged. In Denver, the line interchanged with the major railroads in Denver, and on the western ends, there was the Argentine Central in Silver Plume, and the Gilpin Gold Tram, a unique 2' gauge railroad) in Black Hawk. There are several fantastic books on these lines including Colorado Railroad Museum Annual #10,  Colorado Railroad Museum Annual #26, Georgetown and the Loop, The Colorado Central Railroad, and The Gilpin Gold Tram, and the Gilpin Railroad Era, among others. These connections are particularly interesting. Unfortunately, none of these lines made it past WW2, although part of the line between Georgetown and Silver Plume was rebuilt and operates as a tourist line. Parts of the line were standard gauged, operated by the Colorado and Southern, and today by BNSF as the Golden Branch serving Coors.

Like the other narrow gauge ideas, this one would be a smaller operation. Operationally, the LDEs would include:

• Denver
• Arvada
• Golden
• Forks Creek
• Idaho Springs
• Georgetown
• Silver Plume (and the Argentine Central)
• Black Hawk (Gilpin Gold Tram)
• Central City

The scenic LDEs would include:

• Clear Creek Canyon
• The Central City Switchback
• The Georgetown Loop
• Mines and Mills galore!

One of the challenges, would be modeling the Gilpin Gold Tram. And herein enters T-gauge again. N-scale is 9mm between the rails representing 4'8.5". A 24" gauge line in N-scale would have a gauge of 3.8mm. At 3.2mm, T-gauge is a little tight (20.2") but it is certainly close to Nn2. I even have an Nn2 prototype of one of the tram cars made through 3D printing. More interesting is that for Z-scale, the track gauge is 6.5mm, and so Zn2 would be 2.8mm, and so T-gauge scales out at 27" in Z. It is not implausible to represent Black Hawk in N-scale, and transition to z-scale while climbing to the mines outside of town. As long as the individual towns are kept correct, I think that T-gauge equipment could be the basis for both Nn2 and Zn2. 

The idea of doing something with the Gilpin Gold Tram has definitely hooked my interest, and I have decided to at least build a small 22"x42" Zn2 layout to test out some ideas and determine technical feasibility. I've include the track plan. 

The plan is based on the Jerome and Southwestern, with some modifications. The key questions are Turnouts, track and equipment. I was able to 3D print a car easy enough, fortunately, there are some T-gauge mechanisms that look to be good candidates for the diminutive little shays that plied the line, and so in my mind, the last hurdle is couplers - at least in terms of the equipment.

But, just in case, I ran another calculation and discovered, that Z-gauge track (6.5mm) is very close to HOn2. Not HOn30" as as been done and popularized by Dave Frary and Bob Hayden, but actual HOn2. Okay, it is a little tight at 22.3" instead of 24", but that is close. Track, turnouts and equipment is easy. Some Z or Nn3 cars are actually kind of close to HOn2, or at least the cars on the Gilpin Gold Tram. There are some possible Z-scale mechanisms that could be motive power, and link and pin couplers are do-able. A shelf layout in HOn2 to have a little bit of the kingdom of Gilpin, is possible. In fact, this post took a long time, because I wanted to finish this.

Description: A Gilpin Tramway Ore Car from the 3rd order of cars, ordered in 1895. The cars were numbered 86-155. Requires some 28 gauge wire to represent the spacing rods across the top of the car, and to represent the brake stems, as well as Z-scale Archbar Trucks. To complete the model, Link and Pin couplers and the Brake Wheel should also be purchased, which are designed to be compatible with this model. In addition, 2 M0.5 0.50UNM Metric Screws are necessary to secure the link and pin couplers. The link can be simulated with 0.7mm wire (such as that used in a paperclip. The car is HO scale, 2' gauge, represented using Z-gauge tracks (6.5mm) which equates to 22.3" in HO scale. Recommended in Frosted Extreme Detail or Frosted Ultra Detail options. Polished materials may have reduced detail.

I am quite pleased with the result and eager to hold the prototype. Getting these files done, became my goal so that I could open my Shapeways shop, and also order my prototype car to see if this vision could be realized. The shop can be found here.

Or, check out the blog post.

This line is interesting to me - but it offers small narrow gauge power, 2-6-0s and 2-8-0s, but it is interesting. It would b a lower key operation, and more of a model building exercise. I am not sure this is the layout - but it is interesting to consider.